Berner Mato BACGG Manual De Instrucciones página 12

Tabla de contenido
Do not sharply bend high-pressure hose, regularly check for physically visible damage.
It is recommended to replace item after 3 years by genuine spare part.
Ordering spare parts:
When ordering spare parts, the following information is required:
Type specification, designation of the ET, order number
The following maintenance deadlines should be strictly observed to ensure trouble-free
operation.
High-pressure hose
Nozzle
Battery charger
Checking for loose
connections
Legibility and availability of
information
6
Hinweise bei Störungen:
Symptom
The motor is not
running.
Device does not produce
grease.
Device continues with
the production of
grease.
The battery will not
charge.
7
Specifications:
Grease gun battery
Operating voltage:
Operating pressure:
Flow rate:
Threaded connection
for gripper nozzle:
Temperature:
Fluid media:
Grease of NLGI Class 000 to 2 (DIN 51818) can
be used.
Pastes without lubrication properties (with
abrasives) or silicon pastes must not be used.
8
Disposal
12
Before each use
Mögliche Ursache
The battery is empty or faulty.
The wiring to the motor is faulty.
The gun container is empty.
The grease supply has been
interrupted.
By filling with loose grease, air
bubbles become trapped in the
grease.
Charger without power supply.
The battery remains too hot.
Battery faulty or worn out.
18 V
approx. 400 bar
approx.100ccm/min
R1/8 "Operating
-18 to 50°C
After termination of use the device is to be disposed of in an environmentally
friendly manner in accordance with applicable statutory provisions.
Grease-tainted parts and batteries do not belong in the dustbin!
annually
X
X
X
X
X
X
X
Battery
Nomonal voltage:
Battery Type:
Capacity:
Weights: 1.500 mAh
Weights
High-performance battery grease gun
Complete set with case
Gun with battery and
grease container
Accu-Greaser 18V-S
According to the manufacturer
Behebung
Charge or replace battery.
Remove the battery, dismantle the
handle and check for a loose
connection.
Check the level of the grease
container.
Vent the gun.
Empty gun container and refill.
Vent the gun.
Check that the outlet has power.
Allow battery to cool before charging
Replace battery
18 V
Lithium-Ionen
1.500 mAh/27Wh
4.000 mAh/72Wh
0,3 kg
4.000 mAh
0,6 kg
English
X
X
5.4 kg
3.1 kg
Tabla de contenido
loading

Tabla de contenido