Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Maintenance and cleaning
Basically, carry out mainte-
nance and cleaning works with
switched-off motor and power
plug removed. Danger of injury!
Leave any maintenance and
servicing work not covered by
this manual to our Service-Cent-
er (see P. 113 for the address).
Use only original spare parts.
Allow the machine to cool down
before all maintenance and
cleaning works. Danger of burn
injuries!
Cleaning
•
Clean the machine thoroughly after
every use. In this way, you extend
the life of the machine and avoid ac-
cidents.
•
Keep the gripping handles free of
petrol, oil or grease. Clean the grip-
ping handles, where appropriate, with
a moist cloth soaked in soap. Use no
solvents or petrol for cleaning!
•
Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
Maintenance Interval Table
Machine part
Components of the
chain brake
Sprocket chain wheel
Saw chain (5)
Guide bar (4)
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Check, turn round, clean
and oil
After cleaning, oil the chain lightly with
chain oil.
•
Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
Maintenance intervals
Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Oiling the saw chain
Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance of
the saw chain, the guarantee claim
is invalid.
Remove the power plug and use
cut-protection gloves when you are
handling the chain or the chain bar.
Before
every use
GB
MT
After 10 hours
of operation
83
Capítulos
Tabla de contenido
