Trouble Shooting - Grizzly Tools ERT 450-20 Traducción Del Manual De Instrucciones Original

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not
start
Poor cutting per-
formance
Possible cause
Spool ( 22) is dirty
Spool ( 22) is defective
No mains power
ON / OFF switch (
defective
Worn carbon brushes
Motor defective
Line spool ( 22) does not
have sufficient line
Line has not been conduct-
ed out of the spool (
or only on one side
Remedy
Clean spool
(see "Cleaning and maintenance")
Exchange spool(see "Cleaning and
maintenance")
Check cable, line, plug; repair by
qualified electrician
3)
Repair by After-Sales Service
Lengthen cutting line (see "Op-
eration") or exchange spool (see
"Cleaning and maintenance")
Remove spool and lace line through
22)
opening outwards and return spool.
GB
67