Federal Signal VAMA MIDI Serie Manual Del Usuario página 7

MODEL VOLTAGE
LR-130 12V
LR-135 12V
LR-125 12V
LR-025 12V
Telescopic mast
INSTALLATION INSTALLATION
INSTALLATION INSTALLATION INSTALLATION
The light should be installed on top of the vehicle
with the base parallel to the ground, so that light
is emitted horizontally.
This light can be installed four different ways
depending on your requirements.
MODEL LR-025 (mast mountig)
The base has an elastic part which acts as a
shock absorber, and connects it to the telescopic
mast. (See figure 1). The mast has two brackets
for mounting to the vehicle.
Fig.3: model LR-130
OUTPUT
r.p.m
POWER
55W 150
55W 150
55W 150
55W 150
MOUNTING
Maximum
diameter
Magnetic 118
Permanent 118
Swivel 110
Mast 110
42
MODEL LR-125 (swivel mounting)
To install the LR-125, follow these instructions,
referring to figure 2:
- Select the area where you will mount the LR-
125 and drill a hole of 26 mm. diameter.
- Introduce the connector through the hole,
followed by the threaded stem.
-Orient the light in the desired position. Having
selected the position, screw the nut onto the
threaded stem and tighten. This completes the
installation. Optionally, you may block the
7
DIMENSIONS (mm)
Minimum Maximum
diameter height
88 141
88 147
88 -
88 138
512
30
not extended
Fig.2: model LR-125