Atmospheric Pressure And Weather Forecast; Temperature And Hygrometry; Setting The Measurement Unit/Min-Max Memory/Sensor; Temperature Alert Setting - THOMSON 513631 Manual Del Usuario

WIRELESS WEATHER STATION
ATMOSPHERIC PRESSURE AND WEATHER
FORECAST
The weather station
atmospheric pressure sensor to display this value
and its progression:
- This value can be expressed in hPa or in
inHg. To change the unit of measure,
press and hold for 3 seconds on the
HPA/INGH button, until the unit fl ashes. Press
DOWN or UP to change it.
Following the progression of the atmospheric
pressure:
3 statuses are possible:
Raising:
Steady:
Falling:
The weather station also has a weather forecast
function: It can display 6 different statuses:
Sun Light
clouds
Rainy Heavy rain
Stormy
It is possible to adjust this forecast depending on
the current weather:
- Press and hold the HPA/INHG button for
3 seconds, until the hPa mb or inHG unit fl ashes
press the HPA/INHG button again.
- Once the forecast logo fl ashes,
using the UP and DOWN buttons, you can
scroll through the forecasts, and set the weather
station to the actual weather where you are.
- Press the HPA/
All manuals and user guides at all-guides.com
is equipped with
Cloudy
Snowy
INHG button again to confi rm this setting.

TEMPERATURE AND HYGROMETRY

an This weather station allows you to simultaneously
display the indoor and outdoor temperature as well
as the indoor and outdoor humidity.
The weather station also displays the progression
of these values:
3 statuses are possible:
Raising:
Steady:
Falling:
A comfort indication is symbolised by smiley displays
(13), depending on the indoor readings.
Comfortable
SETTING THE MEASUREMENT UNIT/MIN-MAX
www.thomsonsecurity.eu
MEMORY/SENSOR
- Press the Up button to alternate between
Celsius and Fahrenheit
- Press the MEMORY button to confi rm. Scroll
through the Max/Min/Current value
- Press and hold MEMORY for 3 seconds to erase
the MIN/MAX values saved.
Information: this weather station can display up
to 3 channels for outdoor sensors. It will only use
channel no. 1 (3). You can scroll through the different
channels by pressing the DOWN button briefl y to
display your outdoor sensor.

TEMPERATURE ALERT SETTING

- To activate the outdoor temperature alert
function, press the ALERT button once. The
LED is displayed for you to confi rm the
alert.
- To deactivate the ALERT function, press
C - CONFIGURATION
Too hot/cold
EN EN
9