Safety Information - HEINE mPack LL Manual De Instrucciones

Instructions for use
Read these instructions carefully before using the HEINE mPack LL
keep them in a safe place for future reference.

Safety Information

Range of applications: The HEINE mPack LL
for use with HEINE LED LoupeLight
support is designed for use with HEINE headbands and S-Frames only.
General Safety: All repairs should be carried out by qualified personnel, with
the exception of a battery change with mPack LL. When changing the battery,
use only the original rechargeable battery HEINE Li-ion mPack LL
Safety in use:
• Follow the instructions supplied with the unit regarding installation of the
instrument support and the wall-mounting bracket.
• For wall-mounting, be sure to use the instrument support (1) supplied with
the unit to be sure that the instrument is located safely. Always use the
instrument support (8) for the S-Frame. Be sure to attach the S-Frame securely
to the instrument support as shown in (9).
• Make sure that the local mains voltage is the same as that shown on the
identification plate of the plug-in transformer.
• Use only the appropriate HEINE plug-in transformer to connect the unit to
the local mains supply.
• If not used for long periods, unplug the mains transformer from the mains.
• The ideal temperature for charging is between +10° and +35 °C.
• Do not use the HEINE mPack LL
present.
• We can only guarantee the safety and performance of this unit if it is fitted
with original HEINE accessories and spare parts.
• When moving from a cold to a warm environment, leave the power source
switched off for up to one hour to allow it to adapt to the new conditions.
• The mPack LL has been tested for electro-magnetic compatibility and
radiation. The unit is approved for use in a medical environment.
Symbols
In accordance with local regulations this product
should be disposed of as an electronic device separately.
Double insulated equipment of Protection Class II
Observe the safety information.
WITH RESPECT TO ELECTRICAL SHOCK FIRE, AND
MECHANICAL HAZARDS ONLY IN ACCORDANCE
WITH UL60601-1 & CAN/CSA-C22.2 No. 601.1-M90
IP40 Protection class: Protected from the ingress of small objects,
not water-resistant.
power source is designed solely
®
. When wall-mounted, the instrument
®
in rooms where an explosion hazard is
®
ENGLISH
and
®
.
®