Idiomas disponibles
Idiomas disponibles
Installation
1. Remove the bolts A and spac-
ers B from the rear carrier C.
2. Install the Top case plate 1
onto the rear carrier C by refer-
ring to the figure.
2 Spacer No.1
3 Spacer No.2
4 Spacer No.3
5 Spacer No.4
3. Tighten the bolts to the speci-
fied torque.
Specified torque:
Bolt (M8 L: 50 mm):
23 N·m (2.3 kgf-m, 17.0 lbf-ft)
Bolt (M8 L: 40 mm):
23 N·m (2.3 kgf-m, 17.0 lbf-ft)
6 Bolt (M8 L: 50 mm)
7 Bolt (M8 L: 40 mm)
8 Washer
9 Nut
GENUINE SUZUKI ACCESSORIES
3/4
