Filling The Boiler During Use - ARIETE 6248 Manual De Instrucciones

Filling the tank before use
Warning!
Make sure the appliance is unplugged from the supply mains before filling the tank with water.
Remove the tank (Fig. 7).
Turn the tank upside-down and remove the cap (N) (Fig. 8).
Fill the tank directly beneath the tap with cool tap water (Fig. 9).
NEVER fill the tank beyond the MAX level.
The product functions with normal tap water.
In the case of particularly calcareous waters (with hardness greater than 20°f) use a mixture composed of
50% of tap water and 50% of demineralised water.
Never use pure demineralized water.
Do not add any additives or chemicals (such as for example, amides, starches, perfume or other); Otherwise,
the warranty may be revoked.
Warning!
Never use the appliance without water in the tank.
Put the tank back in, paying attention to match the tank valve with the pin in the appliance seat (Fig. 10). Press
the tank all the way down until it is completely inserted and check that it is correctly installed.
Appliance switching on and use
Before plugging it in, completely unwind the power cord.
Insert the plug into a power outlet (Fig. 11).
Press the on/off button (Fig. 12). Make sure the button indicator light (L) turns on. After about 45 seconds,
steam will come out from the dispenser.
Place the garment on the specific hooks of the dispenser support (B).
Turn the steam adjustment knob (Fig. 13) to select the desired quantity of steam.
The first time the appliance is switched on, it is possible to see a light emission of smoke: This transi-
tory effect is perfectly normal and will disappear very soon.
Use the steam dispenser only performing vertical movements from the bottom upwards and vice versa (Fig. 14).
Attention
Do not use the steam dispenser horizontally or upside down, with the nozzles turned down. Danger of
hot water leakage from the nozzles.
Warning!
Position the steam dispenser on the dispenser support holding the nozzles facing the opposite side to
your body (Fig. 6). Risk of burns.
During use, the steam pipe and the steam dispenser reach high temperatures. This is completely
normal. Do not touch, risk of burns.
Do not use the appliance on fabrics that are supported by other people.

Filling the boiler during use

Always check the level of water in the tank while you are ironing.
Turn off the appliance by pressing the on/off button (L).
Unplug the power cord from the socket (Fig. 11).
Remove the tank (Fig. 7).
Turn the tank upside-down and remove the cap (N) (Fig. 8).
Add water directly from the tap (Fig. 9). NEVER exceed the MAX mark when filling the tank.
Place the tank back on the appliance (Fig. 10), plug the cord in and turn on the appliance again.
15