Before You Begin - Kohler ACRYLIC BATHS K-1132 Guia De Instalacion

RECOMMENDED TOOLS AND MATERIALS
Drill
Plumbers
Silicone
Putty
Sealant

BEFORE YOU BEGIN

S Observe local plumbing codes.
S Baths are designed for a
variety of installations,
depending upon the model
chosen.
S Follow only the steps that
apply to your installation.
S Unpack and inspect the bath
for damage. Then return the
bath to the carton until you
are ready to install it.
S Install the unit to a level
subfloor.
S The basin area requires no
additional support when the
subfloor is level and square
with respect to the stud
framing. Consider using shims
for additional support if the
subfloor is uneven.
B
1007260-2-
Hammer
and Nails
Level
Tape
Measure
S
S
S
S
S
S
S
S
2
S Drop Cloth
S Common
Woodworking Tools
S Water-Resistant
Wall Material
Square
S 2x4's
A tiling-in bead may be optional
and is recommended when wall
material comes in contact with any
top surface of the bath.
Some K-1179 tiling-in beads may
require trimming of the bottom
edge for proper fit.
Protect the bath floor during
installation.
Provide properly-dimensioned
framing.
Fixture conforms to ANSI Standard
Z124.1. All dimensions are nominal.
Before installation, ensure proper
access to the final plumbing
connections.
Compare the roughing-in and room
dimensions, and provide adequate
space for the bath.
Optional aprons must be installed
before the finished floor and wall
materials are installed.
Kohler Co.