Trust ALSET-2000 Guía De Instalación Rápida página 9

ALSET-2000 WIRELESS SECURITY SYSTEM
EN
1. Package content
The following products are included:
u
ALKCT-2000 Remote control
v
ALSIR-2000 Siren
w
ALMST-2000 Magnetic contact sensor
x
ALMDT-2000 Infrared motion sensor
NOTE: This is a quick installation guide, visit www.trust.com/71116 for more in depth info of the
individual products like:
- Specifications
- Mounting
- Reset/unpair
- Tamper switch
- LED indications
2. Open the ALSIR and place batteries
Open the siren by unscrewing the two screws beneath the light cap. When the screws are removed
the cap of the siren can be slid open. When the cap of the siren is slid open place 4x Alkaline D type
1.5V battery in the siren (not included).
3. Put the ALSIR in learn mode
Slide open the cap and press and hold the siren learn button for about 2 second to enter learn mode.
The LED of the siren will be blinking (in the light cap). The learn mode lasts 15 seconds.
4. Open the ALMST and place batteries
Push with a sharp object on top of the magnetic sensor and pull off the backplate. Insert two 1,5V AAA
Alkaline batteries in the slot (not included). Observe the correct polarity of the batteries (place plus and
minus on the correct side)
1
Observe the correct polarity of the batteries.