Tabla de contenido
Idiomas disponibles
Idiomas disponibles
In-line High-Pass Filter for Microphones
These instructions are intended for users without any specific
technical knowledge. Please read the instructions carefully prior
to operation and keep them for later reference.
1 Applications
This filter is used to reduce low-frequency microphone signals
(e. g. footfall noise, handling noise). It is also suited for phantom-powered
microphones. The filter features XLR connectors for connection to the
microphone and to the subsequent unit.
2 Operation
Install the filter between the microphone and the subsequent unit
(e. g. mixer): Either connect the connector INPUT of the filter directly to the
microphone or use an XLR cable to connect the connector INPUT to the
microphone. Connect the connector OUTPUT to a microphone input of the
subsequent unit (refer to the drawing on the back of these instructions).
3 Important Notes
•
The filter is suitable for indoor use only. Protect it against dripping
water, splash water and high air humidity. The admissible ambient
temperature range is 0 – 40 °C.
•
No guarantee claims for the filter and no liability for any resulting
personal damage or material damage will be accepted if the filter is
used for other purposes than originally intended, if it is not correctly
connected, or if it is not repaired in an expert way.
If the filter is to be put out of operation definitively, take it to
a local recycling plant for a disposal which is not harmful to
the environment.
Subject to technical modification.
Tabla de contenido
