Tabla de contenido
•
pump.
circuit boards:
•
Power board
•
Interconnection board
• Control board
and two display boards; both of them are designed for
easy replacement.
After that there are:
•
Power transformer
•
Front panel display and keyboard
•
Rear panel with inpuUoutput connectors
The power board converts a single phase (50-60 Hz) AC
mains supply into a DC voltage and then in a 3 phase,
low voltage, medium frequency output.
The interconnection board contains the power supply
and the optoinsulated interconnection circuits.
The control board maintains a controlled acceleration
of the pump by a gradual increase of frequency and
CONTROLLER SPECIFICATION
Input:
Voltage
Frequency
Power
Output:
Voltage
Frequency
Ooeratina temoerature
Storaae temoerature
Fuse (mains)
Optoisolator input
Loaic normal outout
Circuit breaker
Radio interference suppression
Auxiliary connectors
Interconnecting cables
Weiaht (both models l
speed.
default and RPM display.
The following figure is a picture of the Turbo-V
controllers.
Turbo-V 1800 controller
100, 120, 220, 240 Vac:1:10%, 1-phase
50 to 60 Hz
1300 VA maximum
90 Vac nominal :1:3%
450 Hz :1:2%
900 W maximum
260 W nominal
°
°
0
C to +40
c
°
°
-20
C to + 70
C
F1(pump)T10A(slow blow)
F2(heaterff5Atslow blowl disreaardina the mains
Minimum ON 1.6mA
Maximum 9mA
24 Vdc, 60 mA
10 A for 220 V mains supply
20 A for 120 V mains sunolv
Conforms to FCC 47CFR part 15 sub part J
class A.
Conforms to EN 55011 class A group 1
Conforms to IEC 1000-4-2, 1000-4-3, 1000-4-4
Power socket
Logic socket
Mains cable (3-wire, 3-meter long)
Pumo cable {5-wire. 5-meter Iona)
25 kg (55 lbs)
TECHNICAL INFORMATION
Tabla de contenido
