Tabla de contenido
ROCZ309
00131870
1
5
AAA
00131870bda.indd 4-Abs1:1
00131870bda.indd 4-Abs1:1
Operating Instructions .......................................................... 01
Mode d'emploi ....................................................................... 02
Bedienungsanleitung ............................................................. 03
Istruzioni per l'uso ................................................................. 04
Instrucciones de uso ............................................................. 05
Gebruiksaanwijzing ............................................................... 06
Manual de instruções ............................................................ 07
2
Οδηγίες χρήσης..................................................................... 08
Руководство по эксплуатации ......................................... 09
Instrukcja obsługi ................................................................... 10
3
Návod k použití ...................................................................... 11
Használati útmutató .............................................................. 12
Bruksanvisning ....................................................................... 13
3
Brukerveiledning .................................................................... 14
Brugsanvisning ....................................................................... 15
Pistokelaturi ............................................................................ 16
6
4
7
8
9
Characteristics - Caractéristiques - Eigenschaften - Caratteristiche
Características - Eigenschappen - Características - χαρακτηριστικά
Технические характеристики - Dane techniczne - Technické údaje
Karakterisztika - Data - Karakteristikker - Data - Ominaisuudet
Weight = 50 grammes
Poids = 50 grammes
Gewicht = 50 Gramm
Peso = 50 grammi
Peso = 50 gramos
Gewicht = 50 gram
Peso = 50 gramas
Βάρoς = 50
γραμμάρια
Dimensions - Dimensions - Abmessungen - Dimensioni - Dimensiones
- Afmetingen - Dimensões -
- Méret - Mått - Dimensjoner - Mål - Mitat
вес = 50
грамм
Ciężar = 50 g
Hmotnost = 50 g
Súly = 50 gramm
Vikt = 50 gram
Vekt = 50 gram
Vægt = 50 gram
Paino = 50 grammaa
-
- Wymiary - Rozměry
Διαστάσεις
размеры
= 137 x 39 x 22 mm
This universal remote control is compatible with most television sets controlled by infra-red.
This remote control was programmed in the factory, so that you can use it to control most of
the sets of the THOMSON group's make. For this reason, we recommend that prior to
attempting to programme the remote control, you try it out by means of one of the methods
described in this user manual. However, fi rst of all, you must install 2 batteries (AAA) in the
remote control.
Please keep this guide along with the code list (provided separately), so that you can
subsequently programme your remote control for use with other sets.
The keys
Retrieval of the code stored
in your remote control
1
Indicator light: The red indicator light is lit
To retrieve the code stored in your remote control:
whenever a key is pressed.
1. Hold down keys H and G until the red indicator
2
G : On/Standby or Standby only, depending on
lamp remains lit.
the equipment being used.
2. Press key VOL-.
3
Mode key: Select the device to control (TV or
3. To visualise the fi rst code digit, press PROG+ and
SAT)
count the fl ash pulses of the red indicator lamp. The
4
V+/V-: Increases (+) or decreases (-) the volume
digit "0" does not generate any fl ash pulse.
of the selected device.
4. For the second code digit, press key PROG- and
5
P+/P-: Channel Up and Channel Down buttons.
count the fl ash pulses of the red indicator lamp.
6
H (Mute): Switches the selected appliance
5. For the third code digit, press key VOL+ and count
sound off.
the fl ash pulses of the red indicator lamp.
7
AV: For selecting an external source (SCART,
6. For the fourth code digit, press key VOL- and
HDMI, ...)..
count the fl ash pulses of the red indicator lamp. The
8
(Info): Displays information of the selected
indicator lamp extinguishes after the last fl ash.
appliance.
9
1: Return to channel 1.
When you have retrieved the code of
Code entry
your set, jot it down so that you can
use it whenever needed. After battery
Direct code input
replacement, you'll have to programme
the remote control again.
To directly input the code read from the list:
1. Switch your TV set on.
TV CODE
2. Press the Mode key that corresponds to the type of
product you want to control: TV: television set, SAT:
satellite or cable receiver.
3. On page II of the separate code list enclosed, fi nd
the codes matching the make of the TV set which
Replacing the batteries
you want to control.
4. Hold down keys H and G until the red indicator
Remote Control:
lamp remains lit.
Use 2 AAA 1.5Volt batteries
5. While the indicator lamp is on, with the keys
1. Open the cover on the back of the remote control by
PROG+ (1st number),
pushing down on the tab and lifting the cover off.
PROG- (2nd number),
2. Check the +/– polarity on the batteries and inside
VOL+ (3rd number),
the compartment.
and VOL- (4th number), enter the 4-digit code.
3. Insert the batteries.
EXAMPLE: To enter code 0027, do not press the
4. Press the battery cover back into place.
keys PROG+ and PROG-, press VOL+ twice and
When exchanging the batteries, it may be necessary to
VOL- seven times. The red indicator lamp fl ashes
reprogram the unit. Hence it is advisable to record the
whenever a key is pressed.
codes needed for your devices.
6. To save the code, press key H . The red indicator
lamp goes off. Should the code entered not be on
the list, the red indicator lamp fl ashes rapidly during
3 seconds and then goes off.
7. Code check: Direct the remote control towards the
TV set and try to switch it over to standby by simply
pressing the key G.
Automatic code retrieval
1. Switch your TV set on.
2. Press the Mode key that corresponds to the type of
product you want to control: TV: television set, SAT:
satellite or cable receiver.
3. Hold down keys H and G until the red indicator
lamp remains lit.
4. Direct the remote control towards the TV set and
try to switch it off by simply pressing the key G.
Should the set not switch off, press G as many times
as required (up to 200 times), until the set switches
off. Between two subsequent key depressions, give
the red indicator lamp enough time to extinguish
and light up again (about 1 second). Proceeding
this way will enable you to see whether the set
responds or not.
5. Immediately after the TV set switches over to
standby, press key H to store the programming.
The red indicator lamp goes off.
6. Code check: Direct the remote control towards the
TV set and try to switch it over to standby by simply
pressing the key G.
1
SAT CODE
01.10.2009 16:32:07 Uhr
01.10.2009 16:32:07 Uhr
Tabla de contenido
