Technical Data; Ec Declaration Of Conformity - DeWalt DW476 Manual De Instrucciones

E N G L I S H
ANGLE GRINDER DW476/DW479/DW490/DW492/DW848/
DW491/DW852/DW495/DW496/DW497/DW498/DW499
Congratulations!
You have chosen a D E
innovation make D WALT one of the most reliable partners for professional Power Tool users.
E

Technical data

Voltage
(U.K. & Ireland only)
Power input
No-load speed
Wheel diameter
Spindle
Weight
Voltage
(U.K. & Ireland only)
Power input
No-load speed
Wheel diameter
Spindle
Weight
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
20
WALT Power Tool. Years of experience, thorough product development and
DW476
V 230
V 230/115
W 2,000
-1
min 8,000
mm 180
M14
kg 4.6
DW495
V 230
V 230/115
W 2,000
-1
min 8,000
mm 180
M14
kg 4.6
230 V tools
230 V tools
DW479 DW490 DW492
230 230 230
230/115 230/115 230/115
1,800 2,000 2,200
6,300 6,300 6,300
230 230 230
M14 M14 M14
4.6 4.6 4.6
DW496 DW497 DW498
230 230 230
230/115 230/115 230/115
2,000 2,200 2,400
6,300 8,000 8,000
230 180 180
M14 M14 M14
4.6 4.6 4.7
EC-Declaration of conformity
DW492/DW491/DW495/DW496/DW497/DW498/
DW499
D WALT declares that these Power Tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014, EN 61000-3-2 & EN 61000-3-3.
DW476/DW479/DW490/DW852/DW848
D WALT declares that these Power Tools have been
E
designed in compliance with:
98/37/EEC, 89/336/EEC, 73/23/EEC, EN 50144,
EN 55014-2, EN 55014, EN 61000-3-2 &
EN 61000-3-11.
DW491 DW852
230 230
230/115 230/115
2,000 2,200
4,700 6,300
230 230
M14 M14
4.7 4.6
DW499 DW848
230 230
230/115 230/115
2,400 2,200
6,300 8,000
230 180
M14 M14
4.6 4,7
10 Amperes, mains
13 Amperes, in plugs