Salter 9120 Manual De Instrucciones página 3

TAKING YOUR BODY FAT READING
1. Select the relevant memory - While power is off, press
the / buttons to toggle between memory locations.
When you have selected your memory location, press
'Mode' to confirm. A 'beep' sounds.
This action can also be performed when power is on.
2. 'R' icon will be displayed, and the stored information for
that memory location is displayed.
3. When the display shows zero, step on the scale with
bare feet. Stand still while the unit measures your weight.
The weight will display for 2 seconds. Remain standing
on the scale.
4. As the scale measures your Body Fat, you will see the
following pattern:
5. A long 'beep' indicates that your measurement is
complete. Remain standing on the scale, until your
body fat percentage is shown on the top row of the
display.Your current weight will be shown on the next
row, and the status bar will show your Body Fat
condition (low, normal, etc.).
1. While power is off, press the / buttons to toggle between memory locations.
2. If the selected memory is occupied, press both
of the selected memory.
4
3
4
5
TO RESET MEMORY
/ buttons at the same time to clear the content
1. Follow steps 1-3 in 'Personal Data Entry'.
2. When the display shows zero, step onto the scale with bare feet.
1. Press the centre of the
platform firmly to activate
the scale.
M
• Always weigh yourself on the same scale placed on the same floor surface.
Do not compare weight readings from one scale to another as some differences will
exist due to manufacturing tolerances.
• Placing your scale on a hard, even floor will ensure the greatest accuracy and consistency.
• Weigh yourself at the same time each day, before meals and without footwear.
First thing in the morning is a good time.
• Your scale rounds up or down to the nearest increment.
If you weigh yourself twice and get two different readings, your weight lies between the two.
• Clean your scale with a damp cloth. Do not use chemical cleaning agents.
• Do not allow your scale to become saturated with water as this can damage the electronics.
• Treat your scale with care - it is a precision instrument. Do not drop it or jump on it.
BODY FAT MEASUREMENT WITHOUT MEMORY
WEIGHT READING ONLY
2. Remove foot from platform
and WAIT for display to
show a zero reading.
ADVICE FOR USE AND CARE
66.2
3. Step on scale and stand
very still until your weight
reading is displayed.
5