Important Safeguards - Waring Commercial DME70MK Manual De Operación

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed
including the following:
READ ALL INSTRUCTIONS.
1.
2. To protect against electrical hazards, do not immerse the Waring Commercial
Mixer in water or other liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
4. Avoid contacting moving parts.
5. Do not operate the Waring Commercial Mixer or any other electrical
equipment with a damaged cord or plug, or after the unit malfunctions, is
dropped or damaged in any manner. Return it to the nearest authorized service
facility for examination, repair, or adjustment.
6. Do not use outdoors.
7. Do not let cord hang over the edge of table or counter, or touch hot surfaces.
8. Put this list in a safe place; do not discard.
You will find a small, plastic button located on the underside of the motor base of some
models. This is the reset button for a circuit breaker which prevents the motor from
overheating in the case of an overload. If an overload occurs, the circuit breaker will
shut off the motor and cause the button to protrude slightly from its normal position.
To reset the circuit breaker and resume operation, do the following:
1. Remove containeR fRom mixeR.
2. UNPLUG ThE POWER CORD FROM ELECTRICAL OUTLET.
3. DETERMINE ThE REASON FOR ThE OvERLOAD, AND ELIMINATE ThE
CAUSE (FOR ExAMPLE: REDUCE ThE AMOUNT OF MATERIAL BEING
PROCESSED).
4. PUSh ThE RESET BUTTON BACk INTO ITS NORMAL POSITION.
5. PLUG ThE POWER CORD BACk INTO ELECTRICAL OUTLET.
6. RESUME NORMAL OPERATION.
Save These Instructions
Circuit Breaker Operation
1