PNI HS260 Manual De Usuario página 3

• Do not install the smoke detector in places with permanent smoke.
• Do not install the smoke detector in spaces with temperatures below 0°C or above + 50°C.
• The detector must be more than 60 cm away from other objects (furniture, for example).
• Keep a distance of more than 150 cm between the detector and the ventilation fan, the air conditioner and
the vents.
• Before mounting the detector with double-sided tape, thoroughly clean the surface of the detector of dust
and dirt.
SOUND ALARM, TEST, PAIRING
Stop the audible alarm: In the alarm state, press the TEST button on the device to stop the audible alarm. The
LED continues to flash during the alarm.
Testing: In the normal operating state, press the TEST button to check the operation of the audible and light
alarm and to send the alarm signal to the alarm control panel.
Pairing: access the Add sensor menu in the alarm system you want to pair the smoke detector with. Switch
the alarm system to pairing mode and press the TEST button on the detector to send the wireless signal to the
alarm system. Test whether the two devices have been successfully paired.
MAINTENANCE
• Check the correct operation of the smoke detector weekly by pressing the TEST button.
• The battery has a lifespan of about 1 year, but can be shortened under certain conditions such as too low or
too high temperature and high humidity.
• Make sure the detector works properly before installation.
• When the smoke detector warns that the battery is discharged, replace it with a new one with the same
specifications as the original one.
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that PNI SafeHouse HS260 Wireless Smoke Detector is in compliance with EMC
Directive 2014/30/EU and RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the
following website:
https://www.mypni.eu/products/6383/download/certifications
3 - User manual