Scott A6 2019 Manual Del Usuario página 3

SCOTT BIKE HELMET INSTRUCTIONS
THIS HELMET WAS DEVELOPED SOLELY FOR BICYCLISTS. THIS HELMET IS NOT SUITABLE FOR MOPED RIDERS,
MOTORCYCLISTS, OR ANY OTHER APPLICATIONS. IF YOUR HELMET HAS A CPSC LABEL, THEN IT COMPLIES WITH THE
STANDARD SAFETY REQUIREMENTS OF THE UNITED STATES CONSUMER PRODUCT SAFETY COMMISSION. IF YOUR HELMET
HAS A CE MARKING THIS INDICATES THAT IT CONFORMS TO REGULATION EU 2016 / 425 FOR THE PPE CATEGORY II.
ACCORDING TO STANDARD EN 1078 THE PEAK ACCELERATION OF THIS HELMET FOR EACH IMPACT DOES NOT EXCEED 250 G.
• I. INTRODUCTION
PLEASE CAREFULLY READ ALL INSTRUCTIONS REGARDING THE APPLICATION, USE, STORAGE, CARE, CLEANING, AND
SAFETY OF YOUR HELMET. THIS HELMET IS BASED UPON THE LATEST TECHNOLOGIES IN ORDER TO GUARANTEE
MAXIMUM PROTECTION. THESE INSTRUCTIONS ARE AN IMPORTANT PART OF THE PRODUCT AND MUST BE KEPT FOR
FUTURE REFERENCE. INTENSIVE TESTS GUARANTEE THAT SCOTT HELMETS COMPLY WITH THE DIVERSE REGULATIONS
OF INTERNATIONAL SAFETY STANDARDS IN THE AREAS OF SHOCK ABSORPTION, BREAKAGE, AND SHELL DAMAGE.
YOU WILL FIND THE CORRESPONDING SAFETY LABELS AND NOTES IN THE INTERIOR OF YOUR HELMET.
• II. SAFETY
READ THROUGH THESE WARNINGS :
• THE INTENDED AND REASONABLY FORESEEABLE USE OF THIS HELMET IS ONLY : BICYLING. IT IS NOT INTENDED TO
BE USED FOR MOTOR SPORTS, ON MOPEDS OR FOR OTHER USES.
• THIS HELMET, AND BIKE HELMETS IN GENERAL, ARE CONSTRUCTED IN SUCH A WAY THAT THE HELMET SHELL IS PARTLY
DESTROYED UPON IMPACT IN ORDER TO ABSORB IMPACT ENERGY AND TO PROTECT YOUR HEAD. THEREFORE THE
HELMET HAS TO BE REPLACED AND DESTROYED AFTER IT HAS SUSTAINED A SIGNIFICANT BLOW, EVEN IF NO DAMAGE IS
NOTICEABLE. PLEASE ALSO KEEP IN MIND THAT THE MATERIAL OF THE HELMET CAN BE PENETRATED BY SHARP OBJECTS.
• NO HELMET CAN PROTECT THE USER FROM ALL INJURIES IN ALL ACCIDENTS, IN PARTICULAR IN COLLISIONS WITH
MOTOR VEHICLES. DEPENDING ON THE STRENGTH OF IMPACT, EVEN AN ACCIDENT AT VERY LOW SPEEDS CAN
CAUSE SIGNIFICANT INJURIES OR DEATH.
• THIS HELMET WAS DEVELOPED TO PROTECT YOUR HEAD. IT DOES NOT OFFER PROTECTION FROM INJURIES TO THE
NECK, THE SPINAL COLUMN, OR OTHER BODY PARTS CAPABLE OF BEING AFFECTED BY AN ACCIDENT.
• DO NOT MODIFY OR REMOVE ANY OF THE ORIGINAL PARTS OF YOUR HELMET IN ANY WAY CONTRARY TO THE
RECOMMENDATIONS BY SCOTT. EXPOSURE TO SUNLIGHT MAY CAUSE COLOUR FADING. SCOTT SPORTS SA SHALL
NOT BE LIABLE FOR ANY DAMAGES AND LOSSES DUE TO IMPROPER USE. SOME SCOTT HELMETS ARE EQUIPPED
WITH A DETACHABLE VISOR SYSTEM. THESE SYSTEMS ENSURE THAT THE VISOR IMMEDIATELY DISENGAGES IN
THE CASE OF A FALL OR OTHER IMPACT EVENTS. THE ATTACHMENT OF THESE VISORS DOES NOT DAMAGE THE
MATERIAL OF YOUR HELMET IN ANY WAY.
ENGLISH - 4
(PLEASE READ CAREFULLY)
• THE HELMET SHOULD NOT BE WORN BY CHILDREN WHILE THEY ARE CLIMBING OR ENGAGING IN OTHER SIMILAR
ACTIVITIES, AS THE RISK EXISTS WHEREBY THE HELMET STRAPS COULD CHOKE THE CHILD.
• THIS PRODUCT HAS A LIMITED LIFESPAN AND FOR OPTIMUM SAFETY SCOTT RECOMMENDS REPLACING YOUR
PRODUCT THREE (3) YEARS AFTER PURCHASING DATE. SCOTT SHALL NOT BE LIABLE FOR DAMAGES ARISING
FROM THE USE OF A HELMET WHICH SHOULD HAVE BEEN REPLACED.
• THIS PRODUCT IS NOT A TOY. IT IS SPORTS EQUIPMENT AND IS DESIGNED AND INTENDED FOR SPORTS.
• III. ADJUSTING THE HELMET TO FIT YOUR HEAD
HELMET FITTING
THE SCOTT HELMET DESIGN ENSURES THAT A PROPERLY FITTING HELMET OFFERS OPTIMAL PROTECTION AND
REMAINS SECURELY ON YOUR HEAD IN THE EVENT OF AN ACCIDENT. IF POSSIBLE, TRY ON DIFFERENT SIZES AND
CHOOSE THE SIZE THAT FEELS MOST SECURE AND COMFORTABLE ON YOUR HEAD.
POSITION THE HELMET IN SUCH A WAY THAT THE
FRONT EDGE IS PITCHED LOW TO PROTECT YOUR
FOREHEAD AND THE HELMET IS LEVEL ON YOUR
HEAD (A). NEVER WEAR YOUR HELMET TILTED
BACK SO THAT IT EXPOSES YOUR FOREHEAD (B).
PLEASE NOTE THAT FOR CORRECT FIT AND FUNCTION,
THE FOLLOWING FITTING ADJUSTMENTS MUST BE MADE
WITH THE HELMET IN THE CORRECT POSITION (A).
STRAP DIVIDERS FITTING
IN ORDER TO ADJUST THE STRAPS AND STRAP DIVIDERS TO THE CORRECT POSITION PLEASE DO THE FOLLOWING:
• LOW PROFILE STRAP DIVIDERS : STRAP DIVIDER POSI-
TION CAN BE ADJUSTED FORWARD OR BACKWARDS
TO ACHIEVE A CUSTOMIZED FIT. TO DO THIS ACCESS THE
TOP TWO STRAPS FROM THE BACK OF THE DIVIDER AND
FEED THE STRAPS THROUGH THE DIVIDER. ENSURE THAT
YOU ADJUST THE STRAP POSITION THE SAME ON BOTH
SIDES OF THE HEAD TO ENSURE A GOOD FIT.
• CAM DIVIDERS : DIVIDERS CAN BE OPENED AS SEEN
IN PICTURE. SLIDE THE STRAPS THROUGH THE DIVID-
ERS UNTIL THE STRAPS AND THE DIVIDERS ARE COR-
RECTLY ORIENTATED. ONCE YOU HAVE ACHIEVED COR-
RECT FIT AND POSITION CLOSE THE CAM.
A
5 - ENGLISH
B