Machine-Specific Safety Warnings - Felisatti DCHF 13/18R2 Instrucciones De Servicio

MACHINE-SPECIFIC SAFETY WARNINGS

Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live"
and could give the operatoran electric shock.
Use appropriate detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance.
Contact with electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Penetrating a
water line causes property damage or may cause an electric
shock.
Switch off the power tool immediately when the tool insert
jams. Be prepared forhigh reaction torque that can cause
kick-back. The tool insert jams when:
— the power tool is subject to overload or— it becomes
wedged in the workpiece.
Hold the machine with a firm grip. High reaction torque can
briefly occur while drivingin and loosening screws.
Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
Always wait until the machine has come toa complete stop
before placing it down. The tool insert can jam and lead to
loss of control over the power tool.
Avoid unintentional switching on. Ensure the On/Off switch is
in the off position before inserting battery pack. Carrying the
power tool with your finger on the On/Off switch or inserting
the battery pack into power tools that have the switch on
invites accidents.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,also against continuous
sun irradiation and fire. There is danger of explosion.
In case of damage and improper use of the battery, vapours
may be emitted. Provide for fresh air and seek medical help
in case of complaints. The vapours can irritate the respiratory
system.
When the battery is defective, liquid can escape and come
into contact with adjacent components. Check any parts
concerned. Clean such parts or replace them, if required
Use the battery only in conjunction with your FELISATTI
power tool. This measure alone protects the battery against
dangerous overload.
3