Configuration - Fermax DUOX CITYLINE 1 L Guía Inicio Rápida

INSTALLATION
1
1

CONFIGURATION

LOFT EXTRA TELEPHONE
The telephone supplied in the kit comes PRE-PROGRAMMED from the factory.
If the kit has 2 lines, both telephones, they are PRE-PROGRAMMED.
CONTROL BUTTONS
PROGRAMMATION
1
2
DUOX MEMOPHONE CITYLINE KIT 1-2L
2
2
In conversation, press to open the door.
Auto-start (the telephone is already programmed).
This function is possible upon answering the phone; if the panel is in
standby and if there is a conversation channel available.
For additional functions.
Potentiometer
· Call volume settings (on standby). MINIMUM: disconnects the call
(Do not disturb mode, LED on).
· Increases audio volume settings (during conversation).
2
LED

< 2,5 min
3
4
3
STEPS (if you need to program the phone).
1. With the telephone connected, press the
programming button. You will hear a
confi rmation tone.
2. Press the house call button. Confi rmation tone
is heard again.
* The telephone will not work until it has been
programmed.
Note: You can check that the telephone does not have a
programmed address because the led blinks.
4
5
Cod. 970118 V01_18
S