Technical Data - Chamberlain LiftMaster ART300K Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
FINAL REMARKS
Arrange the handover of the wing gate opener with your customer Make
sure that persons will operate the gate are familiar with its functions and
can operate them without problems. Have your customer practice
operating the gate until he is fully acquainted with all the following:
• Main switch.
• Rules of operation (e.g. do not drive through while the gate is still
opening).
• Additional safety features (photoelectric barrier, contact strip, flashing
lights, etc.).
• Switch to manual operation in case of power failure.
• Provide the customer with a full set of instructions. Inform him to keep
them in a safe place and read them when possible.
• Reference a checklist, so that you have a record of which functions
have been explained and of any points not dealt with.
ACCESSORIES
Model 94335E
3-channel mini transmitter, 433.92MHz
Model 747E
Keypad, 433.92MHz
Model 760E
Key switch
Model 100027
1-Function Keyswitch, surface mount
(Flush mount - 100010)
Model 100041
2-Function Keyswitch, surface mount
(Flush mount - 100034)
Model 100263
Infrared barrier
Model 203285
E-Lock 12 Volt
Model 203292
Loop Detector 1 Channel
Model 203308
Loop Detector 2 Channel
Model 203315
Standard Hardstop
Model 203322
Hard Stop High
Model 203339
Mechanical Floor Lock for Double Wings
Model 600008
IR Sensor Stand - 530mm
Model 600015
Key Switch Stand - 1100mm
Model 600046
2.5 Safety Edge Set (Small)
Model 600053
20m Bulk Pack Safety Edge Profile (Small)
Model 600060
Assembly Pack Safety Edge (Small)
Model 600077
Bulk pack (not shown)
Model 600091
Main switch
Model 600138
20m Bulk Pack Safety Edge Profile (Medium)
Model 600145
20m Bulk Pack Safety Edge Profile (Large)
Model 600152
Assembly Pack Safety Edge
(Medium/Large)
Model 600169
1m (3.2 ft.) Safety Edge Profile (Medium)
Model 600176
1m (3.2 ft.) Safety Edge Profile (Large)
Model 600213
Interface Box for Safety Edges
709298-GB - 05.2004

TECHNICAL DATA

Model
Mains supply
Power consumption
Nominal power
Force max.
Nominal load
Capacitor
Temperature
Frequency Cycles/hr
Weight 1 Motor
Protection class
Max. door width
Max. door weight
The undersigned, hereby declare that the equipment specified, and all accessories,
conforms to the Directives and Standards stated.
Model: ................................................................................................................ART300K
EN55014, EN61000-3, EN61000-4, ETS 300 683, EN 300 220-3, EN60335-1, and
EN60335-2-103
✓ 89/336/EEC
✓ 73/23/EEC
✓ 1999/5/EC
A power door operator, in combination with a door must be installed and maintained
according to all the Manufacturer's instructions, to meet the provisions of Machinery
Directive, 89/392/EEC.
B. P. Kelkhoff
Manager, Regulatory Affairs
USA
September, 2003
© Chamberlain GmbH, 2004
ART300K
230V-240V/50
400W
250W
350Nm
50Nm
10µF
-20
O
to +55
3o%
approx. 9kg
IP44
3.0m
250kg
D e c l a r a t i o n o f C o n f o r m i t y
D e c l a r a t i o n o f I n c o r p o r a t i o n
O
Tabla de contenido
loading

Tabla de contenido