Installation
To connect the water filtering hose to the water line
a
A
a
B
A. Water Line from unit
B. Water Line from Kit
NOTE
• If you have to repair or disassemble the water line, cut off 6.35 mm of the plastic
tubing to make sure you get a snug, leak-free connection.
• Leaving the water line disconnected may cause the water valve to produce a buzzing
sound over time.
• If water is not supplied to the refrigerator, make sure to turn the ice maker off.
42
English
Untitled-6 42
1. Loosen and remove the compression
Remove cap
2. Tighten up the compression nut (a) to
a
3. Open the main water valve and check
03
4. If there are no leaks, dispense about a
If you have to relocate the refrigerator
after connecting the water line, make sure
the joined section of the water line must is
straight.
nut (a) from the water line of the
refrigerator, and insert it to the water
filtering hose.
connect the water filtering hose and the
water line.
for any leaks.
3 liters of water before actually using
the refrigerator to remove impurities
inside the water filtering system.
NOTE
2019-07-22
4:38:59