Ingersoll Rand BP10P3–EU Manual De Instrucciones página 5

4. When the Battery is fully charged, the red light will
flash in half second intervals.
If the light blinks in one tenth or two tenths of a
second intervals, a charging problem exists.
Consult the Battery Charger Manual for probable
causes and solutions.
Changing Rotational Direction
Before operating the Impulse Wrench, make certain the
socket is rotating in the direction required for the job
application.
Model Free
Speed
BP10PQ1–EU 2200
BP10P3–EU 2200
G
Tested in accordance with PNEUROP PN8NTC1.2
♦ Tested in accordance with ISO8662–1
PLACING TOOL IN SERVICE
HOW TO ORDER AN IMPULSE WRENCH
Recommended Torque Range
Soft Draw
in–lb Nm
PISTOL GRIP with 1/4" INSERT BIT CHUCK
80–142 9–16
PISTOL GRIP with 3/8" SQUARE DRIVE
80–142 9–16
Do not attempt to change rotational direction while the
tool is running or without releasing the Trigger Switch.
Failure to do so can cause damage to the Trigger Switch.
The forward/reverse lever is located at the top of the
Trigger Switch. To change direction, proceed as follows:
1. Hold the tool in a normal manner and release the
Trigger Switch.
2. For right hand or clockwise rotation, push the lever
completely to the right.
3. For left hand or counterclockwise rotation, push the
lever completely to the left.
Hard Slam Pressure
in–lb Nm
97–168 11–19
97–168 11–19
5
GSound Level ♦Vibration
dB (A)
Power
77.3 –––
77.3 – – –
Level
2
m/s
8.7
8.7