Congratulations! You have purchased a Regent Cool Touch™ 130
watt heavy-duty fluorescent worklight with stand. This worklight
operates cooler, safer, and is more energy efficient than conventional
halogen worklights. It has durable, die-cast aluminum fixture heads
with independent On/Off switches and a heavy-duty stand that extends
8' in height.
What you need
• Phillips head screwdriver
• 10mm open-end wrench or an adjustable wrench
What's included
• Fluorescent worklight (A)
• (2) 65 watt fluorescent bulbs (B)
• Light assembly bar with knobs (C)
• Adjustable pole assembly (D)
• Tripod stand assembly (E)
What to know
IMPORTANT: READ ALL SAFETY INSTRUCTIONS
WARNING: When using outdoor portable lamps, basic safety instruc-
tions should always be followed to reduce the risk of fire, electric
shock, and personal injur y, including the following:
• Use only three wire outdoor extension cords that have three-prong
grounding plugs and grounding receptacles that accept the
appliance's plug.
• Ground Fault Circuit Interrupter (GFCI) protection should be provided
on the circuit(s) or outlet(s) to be used for the wet location portable
lamp. Receptacles are available having built-in GFCI protection and
are able to be used for this measure of safety.
• Use only with an extension cord for outdoor use, such as an exten-
sion cord type SW, SW-A, SOW, SOW-A, STW, STW-A,STOW,
STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, SJTOW,
or SJTOW-A.
• For indoor and outdoor use.
• UL LISTED for wet locations.
• This device complies with Part 18 of the FCC Rules. Any changes or
modifications to the product described in this instruction sheet that
are not expressly approved by Cooper Lighting could void the user's
authority to operate the equipment. NOTE: This equipment has been
tested and found to comply with the limits pursuant to Part 18 of the
FCC Rules. These limits are designed to provide reasonable
™
A
1 2
FCTS130
B
C
D
E
