GE GCE06GSHSB Manual Del Propietario E Instalación página 8

Hinge cover
Plug buttons
or screws
Plug button
Spacer
8
Hinge
Bottom
hinge
Leveling legs
Door Reversal
1. Remove the small plug button on the left side of
the door top cap.
2. Remove the 2 plug buttons or screws on the left
side on top of the cabinet.
3. Remove the screw from the hinge cover, then
remove the hinge cover by lifting it up by the
front edge.
4. Remove the 2 screws from the top hinge.
5. Lift the door up and off the bottom hinge (right
side).
6. Tilt the refrigerator cabinet back to remove the
right leveling leg.
7. Remove the screws on the bottom hinge (right
side) and remove the leveling legs, as well as
plastic door stop. Move the bottom hinge and
door stop to the left side and secure it with
screws. Re-install the leveling legs
IMPORTANT: The left leg has a spacer or spacer
feature that must be moved to the right side
leveling leg when the door swing is reversed.
8. Screw the right leveling leg, with the spacer in
place, back in place on the right side.
9. Position the door on the left bottom hinge. With
the magnetic gasket holding the door in place,
secure the top hinge with screws.
10. Make sure the door is aligned with the
refrigerator cabinet before continuing.
11. Replace the hinge cover on top of the hinge.
12. Put the plug button in the hole on the right side
of the door cap.
13. Put the 3 (2 on some models) plug buttons on the
right side on top of the cabinet