Overview - Lutron QS Serie Guia De Instalacion

QS Wallstation Models
seeTouch
®
Keypads
QSWS2-1B
QSWS2-2B
QSWS2-3B
QSWS2-5B
QSWS2-7B
QSWS2-2BRL
QSWS2-3BRL
QSWS2-5BRL
QSWS2-2BRLIR
QSWS2-3BRLIR
QSWS2-5BRLIR
QSWS2-1RLD
QSWS2-2RLD
QSWS2-3BD
Signature Series
TM
Keypads
QSWAS-1B
QSWAS-2B
QSWAS-3B
QSWAS-5B
QSWAS-7B
QSWAS-2BRL
QSWAS-3BRL
QSWAS-5BRL
QSWAS-1RLD
QSWAS-2RLD
QSWAS-3BD
Notes
• Read all instructions carefully before starting
installation.
• Lutron recommends that wallstations be installed
by a qualified electrician.
• Use only a cloth with warm water and mild soap to
clean faceplates (no chemical cleaners).
Installation Instructions
seeTouch
®
International Keypads
QSWE-2B
QSWE-3B
QSWE-4B
QSWE-5BRL
QSWE-5BRLIR
QSWE-6BRL
QSWE-7BRL
QSWE-8BRL
QSWE-8BRLIR
QSWE-10BRL
Architrave
TM
Keypads
QSWA-KP5-DN
QSWA-KP5-DW
QSWA-KP7-DN
QSWA-KP7-DW

Overview

• QS wallstations can be programmed to control
lights, shades, or lights and shades.
• Unprogrammed (out-of-box) QS wallstations,
Sivoia QS shades, GRAFIK Eye
®
units, and Energi Savr Node
together until they are programmed otherwise.
• Contact closure inputs allow operation with
occupancy/vacancy sensors, partitioning, and
more.
QS Link Limits
• The QS wired communication link is limited to
100 devices and 100 zones. Each QS wallstation
counts as 1 device and 0 zones.
• QS wallstations use 1 power draw unit (PDU) on
the QS link. Refer to the QS Link Power Draw
Units specification submittal (Lutron P/N 369405)
and the diagram on the opposite page for more
information concerning Power Draw Units.
Compatible Components
The following devices are compatible with the QS
link. For more information on each, refer to
www.lutron.com/qs
• GRAFIK Eye QS control units
®
• QS wallstations
• Sivoia QS shades
®
• QS Interfaces (contact closure, Ethernet/RS232)
• Quantum system
®
• Energi Savr Node
• QS Sensor Module
• QS Keyswitch
2
QS control
®
units will all work
TM
units
TM
Occupant Copy