Application Area; Hazards And Warnings; Liability Exclusion; Cleaning & Maintenance - Renfert Mobiloskop S Instrucciones De Uso Originales

ENGLISH
1. Introduction
We are pleased with your decision to purchase the Mobiloskop S, with swivel arm.
The 5x or 10x magnification offers optimal detail control during precision tasks.
2.

Application Area

The stereoscopic microscope with swivel arm is intended for work performed in laboratories, where it
can be employed simultaneously at several workstations. The microscope's position is infinitely adjust-
able with the aid of the flexible swivel arm.
3.

Hazards and warnings

► Remember that your field of view is greatly restricted when working with the Mobiloskop. Set
up containers and nearby equipment (e.g., Bunsen burners) so that they cannot be knocked
over.
► Working with magnifying equipment for long periods of time can impair your vision. Follow all
guidelines issued by the respon-sible authorities (professional associations) and make sure
you allow an adequate period of time for your eyes to readjust (judging distances)
► Information on REACH and SVHC is available on our website www.renfert.com, in the Support
area.
3.1

Liability Exclusion

Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those cited in the operating instructions;
► The product is altered in any way other than those alterations described in the operating in-
structions;
► The product is repaired by other than an authorized facility or if any but Renfert OEM parts are
employed;
► The product continues to be employed, despite obvious safety faults.
4. Montage / Mise en service
4.1 Installing the Device
For the installation of the support arm and of the microscope head, please refer to the installation in-
struction enclosed to the "Support arm with universal clamp".
4.2 Adjusting the Focal Distance
Rotate the oculars to adjust the correct distance for your eyes (Figure 1).
4.3 Adjusting the Dioptre Compensation
⇒ Place an object on the table top for orientation (Figure 2).
⇒ Turn the dioptre compensation sleeves completely clockwise (to their stops) (Figure 3).
⇒ Now turn the dioptre compensation sleeves one complete turn counter clockwise (Figure 4).
⇒ Place your left eye against the left eyepiece.
⇒ Use the left dioptre compensation sleeve to bring the object into sharp focus (Figure 5).
⇒ Place your right eye against the right eyepiece.
⇒ Use the right dioptre compensation sleeve to bring the object into sharp focus (Figure 6).
4.4 Changing Magnification
Set the magnification to 5 x (0.5) or 10 x (1) (Figure 7).
5. Cleaning / Maintenance
Use a dry, lint-free cloth to clean the eyepiece and the protecting glass
Never use solvents or cleansers containing abrasives!
Mobiloskop S
No. 2200 0400
- 1 -
EN