Safe Practice; Technical Identification Data; Rating Plate; Wiring Information - AFG AE Serie Manual De Instalación, Uso Y Mantenimiento

the appliance accordingly to ensure the
machine is levelled.
The machine has been designed solely and
only for washing plates, glasses and dishes
of various kinds, using drinking water. Any
other used is deemed to be improper.
The dishwasher has been designed to wash
plates, glasses and other crockery: objects
contaminated with petrol, paint, steel or iron
scraps, chemically corrosive acid or alkaline
products or solvents must therefore not be
washed in the dishwasher.
Do not open the door of the dishwasher when
it is operating. Always turn off the
dishwasher before opening it. In any case
the dishwasher is fitted with a special safety
device which immediately stops operation
should the door open accidentally, thus
avoiding an outflow of water.
When the dishwasher is not in use, it is
advisable to disconnect it from the mains
power supply by means of the on/off switch
at the power point.
Always remove the plug from the power
socket before embarking on any cleaning or
maintenance task.
For cleaning and maintenance operations,
never use jets of water or air under
pressure.
This dishwasher should be serviced by
authorised personnel only.
C

SAFE PRACTICE

When using this electrical appliance the
operator must follow certain safe
practices:
never touch the machine with wet or damp
hands or feet or when you are barefoot on
the floor;
never use extensions in areas in which there
is water;
never pull the power cable to unplug the
appliance from the mains supply;
In the event of faults or malfunctions
the operator must:
Disconnect the machine from the power
supply by turning the master switch that has
been installed to position "0" and removing
the plug from the relative power socket.
Shut off the stopcock.
Do not carry out any repairs on the machine.
Contact your dealer, who will be able to advise
you on the Authorised Service Centre nearest
to you.
D

TECHNICAL IDENTIFICATION DATA

RATING PLATE:

The machine has a rating plate that shows:
the data identifying the manufacturer;
the data identifying the machine (model and
serial number);
main technical data for use (voltage values
and supply frequency).

WIRING INFORMATION:

The machine is complete with wiring diagrams
provided separately as attachments to this booklet.

NOISE:

The pressure level of the sound produced by the
machine during normal operation is below
70dB(A).
E
After unpacking, make sure that:
the machine is undamaged and does not have
faults or cracks, dents or damaged parts (if
you have any doubts, DO NOT USE IT and do
not hesitate to contact your dealer);
all the parts of the packing must be collected
and disposed of properly; keep them out of
the reach of children or irresponsible persons
because they are potential sources of danger.

FITTING FEET AND LEVELLING:

Use lifting gear that is appropriate to the weight
of the machine to lift the appliance off the wooden
pallet:
Find the support feet supplied and screw them
into the seats on the base;
19
ENGLISH

UNPACKING