Lower Oven Racks - GE PT9200 Manual Del Propietário

Ocultar thumbs Ver también para PT9200:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Lower Oven Racks

Your lower oven has three rack positions.
Recommended rack positions for various types of
foods are provided in the Cooking Guide. Adjusting
rack position is one way to impact cooking results. For
example, if you would prefer darker tops on cakes,
muffins, or cookies, try moving food one rack position
them down next time.
When baking with multiple pans and on multiple racks,
ensure there is at least 1½" between pans to allow
sufficient space for air to flow.
Oven Racks
The lower oven has Extension racks and offset racks.
To avoid possible burns, place the racks in the desired
position before you turn the oven on.
Extension Racks
Extension racks have an install feature that locks into the
rack supports (guides) on both sides. Once the install
feature is locked into place, always pull the rack out,
by its upper front rail, to its full extension stop position,
when placing or removing cookware.
racks with the graphite lubricant provided with your
oven. Remove the rack from the oven, remove debris in
the slide tracks with a paper towel, shake the graphite
lubricant and place 4 small drops on the two bottom
tracks of the left and right sides. Open and close the
rack several times to distribute the lubricant.
To order additional graphite lubricant, read the
Assistance and Accessories section at the beginning of
this manual.
To Remove An Extension Rack:
1. Make sure the rack is pushed all the way into the
oven.
2. Grasp the rack by both its upper front rail and its
lower handles on two sides and lift straight up to
unlock the rack from the rack supports.
3. Firmly holding onto both the upper front rail and lower
handles on both sides, pull the rack forward. Grasp
the rack on both sides if necessary. Then remove it
from the oven.
To Replace An Extension Rack:
1. Place the rear portion of the rack onto the rack
supports (guides) as shown in the picture.
2. Hold the upper front rail and lower handles and push
the rack all the way in until the install feature locks
into the front rack support.
on the rack slides.
10
Handle
Handle
from the rack
support
Hold the upper front rail and lower
handles and push the rack all the way
in until the install feature locks on the
front support
The oven
has 3 rack
positions in
the lower
oven
Handle
Handle
Front Rack
49-80786-1

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Pt9200slss

Tabla de contenido