Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.
To rotate the gear housing, depress and hold the lock button (A) Fig. 7. Move
the gear housing up or down to the desired position or angle. Release the lock
button and continue to move the gear housing until the lock button snaps into the
desired detente position (Fig. 8).
A
FRONT SCROLL HOUSING ADJUSTMENT
Disconnect the tool from the power source!
The variable angle reciprocating saw has a rotatable front scroll housing for easier
radius cuts. This feature permits additional access in close workspaces where
conventional tools cannot be used. The front scroll housing can rotate 360°, and
can be adjusted radially to 12 detente positions. This feature is designed to simplify
adjusting to radial angle of cut. Combined with the rotatable gear housing, this
housing provides accessibility to almost any cutting operation.
To rotate the front scroll housing, depress and hold the lock button (A) Fig. 9. Hold
the button depressed while moving the front scroll housing clockwise or counter-
clockwise to the desired radial position or angle. Then release the lock button and
continue to move the front scroll housing until the lock button snaps into the desired
detente position (B) Fig. 10.
A
Fig. 7
Fig. 9
11
Fig. 8
A
Fig. 10
Tabla de contenido
