FIRST STEPS
LOADING AND CHECKING THE BATTERY
Use one 3 V lithium battery (CR123A or DL123A).
1. While pressing the bottom of the
1
battery compartment cover in
1
direction
, turn it in direction
open.
• Make sure the lens barrier is
closed before opening the battery
compartment cover.
2. Insert the battery correctly. Close
2
the battery compartment cover.
• A brand-new battery lasts for about
15 rolls of film.
3. Slide the lens barrier in direction
3
until it clicks. The lens comes out
and the flash flips open. Check the
remaining battery power on the LCD
panel.
lights (turns off
Battery is OK. You can shoot.
automatically).
blinks and other
Battery is low and should be replaced
indicators are displayed
with a new one.
normally.
blinks and other
Battery is dead and should be replaced
indicators go out.
with a new one immediately.
ATTACHING THE STRAP
DIOPTER ADJUSTMENT
Attach the strap as shown.
Turn the diopter adjustment dial
until the autofocus marks are clear.
EN
2
to
1
5