Proper Use; Environmental Protection; Safety Instructions - Kärcher Teleskop Strahlrohr Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Please read and comply with
these instructions prior to the
initial operation of your appliance. Retain
these operating instructions for future refer-
ence or for subsequent possessors.

Proper use

Please use this telescopic spray pipe along
with a high-pressure cleaner only
to clean inaccessible machines, vehi-
cles, buildings, facades etc. using a
high-pressure water jet.
in the given pressure and temperature
range.
using approved attachments and spare
parts.
The adapters provided are used to con-
nect the spray lance to new accesso-
ries.

Environmental protection

The packaging material can be recy-
cled. Please do not place the pack-
aging into the ordinary refuse for disposal,
but arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of
old appliances. Please dispose your old ap-
pliances using appropriate collection sys-
tems.
Warranty
The terms of the guarantee applicable in
each country have been published by our
respective national distributors. We will re-
pair possible faults on your unit free of
charge within the warranty period, insofar
as the faults are caused by material defects
or defective workmanship. Guarantee
claims should be addressed to your dealer
or the nearest authorized customer service
centre, and supported by documentary evi-
dence of purchase.
6

Safety instructions

 Please observe the safety instructions
of your high pressure cleaner.
Danger
 High pressure jets can be dangerous if
improperly used. The jet must not be di-
rected at persons, animals, live electri-
cal equipment or at the appliance itself.
 The jet must not be directed at other
persons or directed by the user at him/
herself to clean clothing or footwear.
 Never use the appliance to clean ob-
jects containing hazardous substances
(e.g. asbestos).
 Do not process any inflammable, explo-
sive, corrosive or poisonous consuma-
bles.
 Do not touch uninsulated components if
they have been treated with consuma-
bles whose temperature exceeds 40°C.
 Do not operate this attachment if there
are leaks.
 Stop operating the attachment immedi-
ately whenever there are functional dis-
ruptions.
 Never block the depressed triggering
lever of the gun or prevent its closure in
some other way.
 Vehicle tyres or tyre valves are suscep-
tible to damage from the high pressure
jet and may burst. The first indication of
this is a discolouration of the tyre. Dam-
aged vehicle tyres/tyre valves are high-
ly dangerous. Ensure that a distance of
at least 30 cm is observed when clean-
ing with the jet!
 The handgun is subjected to a recoil
force when the water jet is discharged.
Find out the recoil force as described in
the Preparation chapter and initiate cor-
responding measures.
 Do not use the accessories on slippery
floors or ladders.
 Do not use the accessories on scaffold-
ings without first securing them against
falling.
– 1
EN
Tabla de contenido
loading

Tabla de contenido