Troubleshooting; Power Indicator Is Not Illuminated; Fuse Replacement; No Sound - Rotel RA‑1592 Manual De Instrucciones

16
• FACTORY DEFAULT: This sets the unit back to the original state as when
it left the factory. Press the + button on the front panel or RIGHT arrow
button on the remote control to select <YES> then press the "ENTER"
button on the front panel or on the remote control.
NOTE: All previously configured options will be erased and reset to
the factory default settings.

Troubleshooting

Most difficulties in audio systems are the result of incorrect connections,
or improper control settings. If you encounter problems, isolate the area
of the difficulty, check the control settings, determine the cause of the fault
and make the necessary changes. If you are unable to get sound from the
RA-1592, refer to the suggestions for the following conditions:

Power Indicator Is Not Illuminated

The Power Indicator ring around the power button and the basic items in the
Display window should be illuminated whenever the RA-1592 is plugged
into the wall power outlet and the POWER switch is pushed in. If it does not
light, test the power outlet with another electrical device, such as a lamp.
Be sure the power outlet being used is not controlled by a switch that has
been turned off.

Fuse Replacement

If another electrical device works when plugged into the power outlet, but
the Power Indicator still will not light when the RA-1592 is plugged into
the wall outlet, it indicates that the internal power fuse may have blown.
If you believe this has happened, contact your authorized Rotel dealer to
get the fuse replaced.

No Sound

Check the signal source to see if it is functioning properly. Make sure the
cables from the signal source to the RA-1592 inputs are connected properly.
Check the wiring between the RA-1592 and the speakers.

Cannot Connect via Bluetooth

If you cannot pair your Bluetooth enabled device to the RA-1592, delete the
memory of the previous connection on the RA-1592 and on your device. On
your device this is often listed as "Forget this Device". On the RA-1592 IR
remote PRESS and HOLD the STOP
display shown "Reset BT DB List?" then release the button. Select <Yes> and
press "ENTER". Then try to make the connection again.
button for 5 seconds until the front
I
RA‑1592 Stereo Integrated Amplifier

Playable Audio Formats

USB Apple (iPhone, iPod, iPad)
Format
Any supported file loaded to Apple device. Phone
Any supported file
may resample depending on stored format. May
loaded to Apple
exclude Apps designed to play formats not originally
device.
supported by the sending device.
APTX Bluetooth
Format
Any format supported May exclude Apps designed to play formats not originally
by the sending device. supported by the sending device.
PC-USB
Format
Format determined Any supported format by the PC software
by the Media Player/ PCM Audio: 44.1k, 48k, 88.2k, 96k, 176.4k, 192k
Server software that (16 bit and 24 bit)
you use. DSD64 and DSD128
Coax/Optical
Format
44.1k, 48k, 88.2k, 96k, 176.4k, 192k
SPDIF LPCM
16 bit, 24 bit
Notes
Notes
Notes
Notes