Belt Adjustment; Moving & Storage Instructions - SPORTSTECH F37 Manual Del Usuario

8. Moving & Storage Instructions
Moving your Treadmill
The treadmill can then be moved by tilting the
treadmill deck towards you onto it's transportati-
on wheels.
(Please ensure the power cord cable has been
disconnected from the treadmill before attempt-
ing to move it).be lowered to the ground.

BELT ADJUSTMENT

• Place treadmill on a level surface.
• Run the treadmill at 6-8km/h.
• If the belt has drifted to the right, turn the right bolt clockwise a 1/2 turn and turn the left bolt
anticlockwise a 1/2 turn (Picture C)
• If the belt has drifted to the left, turn the right bolt anticlockwise 1/2 turn and turn the left
bolt clockwise a 1/2 turn (Picture D)
• Test for at least 15 seconds at 4km/h (check and adjust a further quarter or half turn until the
belt is centered
NOTE: The running belt should not be tightened too hard as this can cause noise and damage the
machine.
Folding away your Treadmill
A.)Turn off the treadmill, switch off at the main power switch
and pull out the plug.
B.) Lift the treadmill deck up towards the main console. You
should feel the treadmill gas spring system engage.
C.) To lower the treadmill deck, press the gas spring system in
with your foot to disengage the lock. The treadmill deck can now
be lowered to the ground.
37