Steamery Cirrus 2 Steamer Manual De Instrucciones página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Cirrus No.2 Steamer
BOX CONTENT
1.
Cirrus No.2 Steamer
2.
Water Container
3.
Travel Bag combined as a wearable ironing tool
Operating Instructions
THIS DEVICE IS FOR HOUSEHOLD USE ONLY (for commercial use,
Steamery recommends our commercial steamer model Stratus No.2
Professional Steamer.)
5
Preparations
Remove the water container by pulling it in the opposite direction from the nozzle
and lift it out from the steamer. Take off the rubber plug on top of the water
container and fill it with distilled water as this will prevent mineral deposits in the
boiler that can reduce performance or clog the water system. Close the water
container with the rubber plug and put it back in position in the steamer.
Using Your Cirrus No.2 Steamer
1.
Turn on the steamer by putting the plug into a power outlet and wait 20-
25 seconds until red light turns off and the green light comes on. This
indicates that the steam has reached the right temperature for use. Do
not press the steam button before the green light comes on.
2.
While steaming, if the red light goes on, wait a few seconds without
pressing the button. The steam needs to reach the right temperature again.
3.
When using the device for the first time, test steaming first on an old cloth
as there mat still be dry powder sediment left in the steamer from the
manufacturing process.
4.
Steam your preferred garment by hanging it on a hanger and move the
nozzle over the fabric at the same time as you press the steam button to
spray steam on to the garment. Point the steamer so the steam jets away
from you. Do not use the steamer for more than 30 minutes continuously. If
you wish to use your steamer for more than 30 minutes, let it cool off for
one hour in between uses.
6
Tabla de contenido
loading

Productos relacionados para Steamery Cirrus 2 Steamer

Tabla de contenido