Mellerware Prosteam 3000 Manual Del Usuario página 5

- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
- Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appli-
ance.
- Do not wrap the power cord around the appli-
ance.
- Do not clip or crease the power cord.
- Do not allow the power cord to hang or to
come into contact with the hot surfaces of the
appliance.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedi-
ately disconnect the appliance from the mains
to prevent the possibility of an electric shock.
- Do not touch the heated parts of the appliance,
as it may cause serious burns.
USE AND CARE:
- Fully extend the appliance's power cable before
each use.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Do not use the appliance if the on/off switch
does not work.
- Do not use the appliance if any of the switches
do not work.
- Use the appliance handle/s, to catch it or move it.
- Do not use the appliance if it is tipped up and
do not turn it over.
- To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
- Respect the MAX level indicator. (Fig.1)
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not store or transport the appliance if it is
still hot.
- Keeping the iron in its housing support at
maximum temperature for too long time, may
cause its colour change, which will not affect
the correct working order of the appliance.
- For a correct operation, keep the soleplate in
proper conditions; do not operate over metal
objects (ironing board metal parts, buttons,
zips etc.)
- It is advisable to use distilled water, especially
if the water in your area contains clay or if it is
"hard" (containing lime or magnesium).
- Check that the lid is closed properly before
starting the appliance.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance into a surface while
in use.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance to dry textiles of any
kind.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
SERVICE:
- Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer's liability null and void.
DESCRIPTION
A Spray button
B Steam blast button
C Steam flow control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Filling spout
H Spray nozzle
I Soleplate