6 - SETUP
6.1 - 42AM air heater
To ensure correct air diffusion and to comply with the EN 294 standard relating to safety
zones, you are recommended to position AIR HEATER units at a height of:
■ Between 2.5 and 4.5 metres when wall-mounted
■ Between 4.5 and 10 metres when ceiling-mounted.
The rear of the unit must be at a sufficient distance from the wall to facilitate removal of
the fan motor assembly when necessary.
6.2 - 42AMA Destratifier
It is recommended that destratifiers are positioned at a height of 5 to 15 metres.
The rear of the unit must be at least 145 mm away from any walls to facilitate removal of the fan
motor assembly when necessary.
6.3 - Wall-mounting the 42AM air heater
Installation using wall-mounting support kit
Installation mainly for HEATING purposes
Size
42AM-EC30
B
C
D
X
mm
Y
mm
Dimensions
mm
XX7436983-07_IOM_11_2019_42AM_AMA.indb 27
XX7436983-07_IOM_11_2019_42AM_AMA.indb 27
42AM-AC35
42AM-AC40
42AM-EC35
42AM-EC40
Drain sleeve in cooling mode, outer diameter 32
310
390
Distance to allow between the wall bracket legs for mounting the AIR HEATER
512
558
610
Installation using low wall-mounting support kit
Installation mainly for COOLING or REVERSIBLE purposes
42AM-AC45
42AM-AC50
42AM-EC45
42AM-EC50
Filter box wall bracket
Wall bracket (Code 7181226)
710
808
Min: 0.15 m
42AM-AC63
42AM-AC64
42AM-EC63
260
340
943
943
27
17/12/2019 12:17:41
17/12/2019 12:17:41