Samsung RT18M Serie Manual Del Usuario página 20

Installation
01
02
03
1. Connect the household water line to the assembled compression fitting.
- If you are using copper tubing, slip the compression nut (B) (not supplied) and ferrule
(not supplied) on the copper tubing (not supplied) as shown.
- If you are using plastic tubing (A), insert the molded end (Bulb) of the plastic tubing
(A) into the compression fitting.
CAUTION
If you use plastic tubing, (A) do not use it without the molded end (Bulb).
2. Tighten the compression nut (B) onto the compression fitting. Do not over-tighten the
compression nut (B).
3. Turn the water on and check for any leakage. If you find water drops or leakage in
the connection areas, turn off the main water supply. Check the connections and, if
necessary, tighten.
4. After you turn on the refrigerator, let the ice maker makes ice for 1 to 2 days. Over that
period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure
all impurities have been removed from the water line.
NOTE
• If you have to repair or disassemble the water line, cut off
make sure you get a snug, leak-free connection.
• Leaving the water line disconnected may cause the water valve to produce a buzzing
sound over time.
• If water is not supplied to the refrigerator, make sure to turn the ice maker off.
20 English
Untitled-5 20
A
04
05
06
07
08
B
A. Refrigerator
B. Household water supply line
01 Compression nut ( /
1
4
02 Ferrule (Not supplied)
03 Copper tubing (Not supplied)
04 Plastic tubing (Assembled)
05 Compression fitting
06 Molded end (Bulb)
07 Compression nut (B) (
supplied)
08 Plastic tubing (A) (Not supplied)
NOTE
RT**M6215* models ship with parts 01 and
05 while RT**M6213* models are available
with the optional Auto Ice Maker Kit.
/ " of the plastic tubing to
1
4
")
/ ") (Not
1
4
2017-07-20 6:30:55