HJM DHM428 Instrucciones De Uso página 32

Deshumidificador DHM428_Maquetación 1 17/06/14 09:49 Página 32
DRAINING THE COLLECTED WATER
When the drainage tank is full, the tank full indicator light will turn on,
the operation will stop automatically and the buzzer will beep 15
times to alert the user, that the water need to be emptied from the
drainage tank.
Emptying the Drainage Tank
1. Lightly press on the sides of the tank with
both hands and pull the tank out gently.
1. Discard the collected water
NOTE
1. Do not remove the float from the water tank. The water full sensor
will no longer be able to detect the water level correctly without the
float and water may leak from the water tank.
2. If the drainage tank is dirty, wash it with cold or lukewarm water.
Do not use detergent, scouring pads, chemically treated dust
cloths, gasoline, benzene, thinner, or other solvents, as these can
scratch and damage the tank and cause water leakage.
- 32 -
E
N
G
L
I
S
H