HJM DHM428 Instrucciones De Uso página 31

Deshumidificador DHM428_Maquetación 1 17/06/14 09:49 Página 31
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when the unit is
plugged in, regardless of whether the unit is operating or not.
2. Press
operation.
3. Press
It can be adjusted between high speed and low speed.
4. Press
which can be set from 40% to 80% at 5% intervals.
After a period of working,when environment humidity is lower than
the selected humidity by 2%, compressor will stop and fan stops
working 3 mintues later;When environment humidity is equel to or
higher than the selected humidity by 2%, compressor will restart
once 3-minute compressor protection time over.
5. Press
Press the button to program the time when the unit turns on and
turns off. If you want to cancel the timer programming, press the
button to adjust the time at 00, and press the button ,it will be cir-
culate from 00-01-02......23-24.It is the programmed time to switch
the machine. The programmed time will be cancelled when to
switch compressor manually each time. The programmed time
remains unchanged if the machine stops to wok due to water full
or during defrosting.
7. Press
When press
open and the indication lights.(Optional)
button once to start operation. Press it again to stop
button as follows. Press to set the desired fan speed.
button to set the desired humidity level in the room,
button can be timer setting.
button (Optional)
button the Ion function and UV function will be
- 31 -
E
N
G
L
I
S
H