Idiomas disponibles
Idiomas disponibles
LEDs
The LED indicators make it easier to monitor the switch and its
connections.
LED
Power
Loop
LINK/ACT
Ports
All ports on the switch support Auto‐MDI/MDI‐X functionality, so
crossover cables and uplink ports are not needed for connections to PCs,
routers, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal
performance; if a status LED doesn't indicate.
Power
Use the included power cord to connect the device to an
AC outlet. Confirm that the power LED on the front panel
is lit.
PLACEMENT
Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface that can support the weight of the switch
• with a minimum of 25 mm (1") of clearance on the top and sides for
adequate ventilation
• away from sources of electrical noise: radios, transmitters, broadband
amplifiers, etc.
• where it cannot be affected by excessive moisture
Status
Operation
On
Power on
Off
Check the AC connection; turn the power on
On
A loop exists
Off
No loop
On
Valid port connection
Blinking
Valid port connection; data transmitted/received
Off
No link established
English
2 | P a g e
