Product Overview; Daily Care And Maintenance - Xiaomi Mi Electric Scooter Serie Manual Del Usuario

2. Product Overview

Handlebar
Front Brake Lever*
Front Light
Rear Brake Lever
Stem
Reflector
Front Fork
Wheel Motor
Charging Port
Control Panel & Power Bu on
Speedometer:
Display the current speed of the scooter, as well as to display error codes.
Modes:
Pedestrian mode (walking mode*): The maximum speed of the scooter is 6 km/h, and the tail light is blinking in this mode
(the headlight and the tail light are both on*). D for standard mode, and S for sport mode.
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Locking Reminder: Lock the scooter via the Mi Home/Xiaomi Home app.
Error Notification: When the wrench icon displays red, it indicates that the scooter needs repair. When the wrench icon blinks red, it
indicates that the scooter has an error.
Ba ery Level:
The ba ery power is indicated by 5 bars, each representing approximately 20 % of a full ba ery.
Overheating Warning:
When the ba ery temperature has reached 50°C, the thermometer icon will be on. This will result in reduced
acceleration and possibly charging issues. Immediately stop using or charging the scooter, and wait for its ba ery temperature to cool
down. Once the ba ery temperature is within the normal operating temperature range, the scooter can be used or charged again.
Power Bu on: Press the bu on to turn the scooter on, and hold the bu on for 3 seconds to turn the scooter off. When the scooter is
on, press the bu on to turn on/off the headlight and tail light, and press twice to cycle through the modes.
04
* For products under eKFV only.
Accelerator
Control Panel & Power Bu on
Bell Lever
Scooter Bell
Quick Release Lever
Buckle
Mudguard
Tail Light &
Rear Reflector
License Plate Holder
Disc Brake
Side Reflector
Kickstand
Ba ery Compartment

3. Daily Care and Maintenance

Cleaning and storage
If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some
toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth.
Notes: do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to
prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning, make sure that the
scooter's turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in
electric shock or other major problems.
When the scooter's not in use, keep it indoors where it is dry and cool. Do not put it outdoors for long time. Excessive
sunlight, overheating and overcooling accelerate tire aging and compromise the scooter and the ba ery pack's lifespan.
Tire maintenance
Regularly check the tire pressure (at least every 2-3 months), the recommended tire pressure is 50 psi. The max. tire
pressure is 60 psi. Riding with an incorrect tire pressure reduces tire life and safety.
Maintenance and removal of the ba ery
Do not remove the ba ery. Removing the ba ery is complicated and can alter the operation of the machine: You can
contact an authorized repairer if the product is still guaranteed. If the product is not guaranteed you can contact any
specialized repairer of your choice. You can ask for the list of the authorized repairers to the customer service available
at www.mi.com. For any further question, you can contact the customer service available at www.mi.com.
Spare tires supplied with the product are to be mounted on the wheel by a professional repairer. Removing the wheels is
complicated and incorrect assembly can lead to instability and malfunctions:
– Please contact an authorized repairer if the product is still under manufacturer guarantee. You can ask for the list of
the authorized repairers to the customer service available at www.mi.com.
– If the product is no longer under guaranteed you can contact any specialized repairer of your choice.
– Should you have questions, you can contact Xiaomi's customer service available at www.mi.com.
1. Do not use ba ery packs of other models or brands, as there may be a safety risk.
2. Do not disassemble, squeeze or puncture the product. Do not touch its ba ery contacts. Do not disassemble or poke
the outer casing. Do not place the product into water, fire nor expose it to temperatures above 50°C (including heat
sources such as stoves, heatings, etc.). Avoid metal objects from touching the ba ery contacts, since this may result
into short circuits, physical injury or even death.
3. Any water ge ing into the ba ery may cause damage to the internal circuit, risk of fire or even explode. If there is any
suspicion of water ge ing into the ba ery, immediately stop using the ba ery and return it to the A er Sales service
for inspection.
4. Only use the original charging adapter to avoid potential damage or fire.
05