Snow Joe AUTO JOE AJS8000 Manual Del Operador página 9

4. To turn off the jump starter, press and hold the power
button for 3 seconds.
5. The appliance is equipped with short-circuit protection.
When used as a power bank and a short circuit occurs
on one of the ports or jacks, the appliance will shut down
automatically. If this happens, disconnect all connected
devices and charge the jump starter to restart.
Use of the Worklight and the Flashlight
The jump starter features several different light modes. To
switch between the light modes, simply keep pressing the
power button until it reaches the desired mode.
While in any of the work light modes, you can turn the unit OFF
by pressing and holding the power button for 3 seconds.
NOTE: If the worklight and the flashlight cannot be started,
double check if the jump starter needs to be charged.
Operation
x2
x3
x4
x5
x6
x7
Light Mode
Primary
worklight
mode: solid
white light from
the worklight
panel
Warning light
mode: solid
red light from
the worklight
panel
Intermittent
light mode:
flashing red
light from
the worklight
panel
Flashlight
mode: solid
white light
from the
bottom
SOS light
mode: SOS
in Morse
code from the
bottom
OFF
• The worklight panel can be adjusted as shown below for
convenient illumination (Fig. 7). The unit is also equipped
with a retractable handle. Simply pull it out to hang or carry
the unit (Fig. 8).
Fig. 7
Work light
panel
Fig. 8
Retractable
handle
• If needed, utilize the magnetic base of the jump starter to
mount the unit while using the worklight. To avoid possible
injury, do not hang the jump starter anywhere overhead.
Maintenance
m
WARNING!
Always switch the product off and
disconnect any devices plugged in before performing
inspection, maintenance, and cleaning work.
m
WARNING!
When servicing, use only identical
replacement parts. Use of any other parts could create a
hazard or cause product damage.
Cleaning
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use.
m
WARNING!
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can damage, weaken or
destroy plastic, which could result in serious personal injury.
9