Specifications - Denon AVR-1404 Instrucciones De Operación

ENGLISH
20

SPECIFICATIONS

2 Audio section
• Power amplifier
Rated output:
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N ratio:
2 Video section
• Standard video jacks
Input / output level and impedance:
Frequency response:
• S-video jacks
Input / output level and impedance:
Frequency response:
2 Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N ratio:
Total Harmonic Distortion:
2 General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
2 Remote control unit (RC-942)
Batteries:
External dimensions:
Mass:
* For purposes of improvement, specifications and design are subject to change without notice.
30
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
Front: 75 W + 75 W
110 W + 110 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
Center: 75 W
(6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
110 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
Surround: 75 W + 75 W
110 W + 110 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
16 ~ 16 Ω/ohms
Front: A or B
12 ~ 16 Ω/ohms
A + B
16 ~ 16 Ω/ohms
Center, Surround:
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
98 dB (IHF-A weighted) (TONE DEFEAT ON)
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +1, –3 dB
Y signal — 1 Vp-p, 75 Ω/ohms
C signal — 0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +1, –3 dB
[FM] (note: µV at 75 Ω/ohms, 0 dBf=1 x 10 – 15
W)
87.50 MHz ~ 108.00 MHz
1.0 µV (11.2 dBf)
MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
MONO 0.15 % (1 kHz)
STEREO 0.3 % (1 kHz)
AC 230 V, 50 Hz
220 W
1 W Max (Standby)
434 (W) x 147 (H) x 417 (D) mm
10.3 kg
R6P/AA Type (two batteries)
55 (W) x 225 (H) x 34.5 (D) mm
165 g (including batteries)
[AM]
522 kHz ~ 1611 kHz
18 µV