Product Identification; Control Identification - Health Zenith 598-1136-04 Manual De Instrucciones

Light Control - ON, OFF, DIM* with
indicator light.
Control Group Indicator- Light on is
Group A, light off is Group B (Note:
also flashes upon Program entry).
AM, PM, 24 Hour
Clock Set - Lights
indicate AM or PM
setting. No light
indicates 24 Hour
setting.
SELECT, (-, +) - Set hours and
minutes for clock and ON/OFF
program setup.
TIME SET - Set the time and select
between 12-hour or 24-hour mode.
PROGRAM - Program ON/OFF times
for light controls (light is on when in
program mode).
*DIM Control: Dims lighting controls that are equipped with the dimming feature.
Pressing DIM will toggle through the different dim levels. Each time the DIM
button is pressed, the control LED will momentarily light.
The receiver saves the last dim setting used. To recall the last dim setting, press
the DIM control once.
Note: Not all lighting controls have the DIM and PANIC (flash) feature.

Product Identification

Clock
AM
PM
– Select + Time Set Program
Control Group - Select Group A or B
lighting controls.
Light Program Modes - Select Mode
1, 2, 1 & 2, or OFF (lights will indicate
which mode(s) are selected.
GROUP
A B
ON
DIM DIM
OFF
1 2
MODE
ON
DIM DIM
OFF
A
ALL
ON
ON
DIM DIM
OFF
ALL
OFF
ON
PANIC
DIM DIM
OFF
ALL OFF - Turns all lights within a
Group OFF. Select either Group A or
B then press ALL OFF.
PANIC* - All lights within a Group will flash
ON and OFF. Select either Group A or B
then press PANIC.
2

Control Identification -

Remove clear plastic film
ON
by placing two fingers on
OFF
the plastic and "pinching"
ON
OFF the plastic. Remove card.
Use the decals (included)
ON
OFF
or write on the card to la-
ON
bel each control. Replace
OFF
card and plastic film.
ALL ON - Turns all lights within a
Group ON. Select either Group A
or B then press ALL ON.
598-1136-04