Battery Disposal - Kalorik USK KS 2 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Empty the dust collector and clean it with soapy water if
necessary.
To clean the filter you can detach it
from its holder (see picture C). Shake it
or, if necessary, clean it in soapsuds. If
you use soapsuds, rinse the filter and
let it dry before putting it back into the
appliance.
Once the filter is clean and dry,
attacht it to its holder, and insert
the filter holder in the dust
collector. To do so, make sure the
rib in the middle of the holder is
right across the left-hand stripe
indicated on the dust collector
and turn it clockwise. Caution:
make sure the filter is facing towards the upper part of the dust
collector (see picture D).
If the filter is too dirty or damaged it must be replaced. To do so,
please contact the nearest customer service.
After having replaced the filter, attach the dust collector to the
motor unit.

BATTERY DISPOSAL

To preserve natural resources, please recycle or dispose of expired
battery pack properly.
This product contains nickel-cadmium battery and must be disposed
of properly.
Local, state or federal laws may prohibit disposal of nickel-cadmium
battery in ordinary trash. Consult your local waste authority for
information regarding available recycling and/or disposal options.
WARNING:
Upon removal, cover the battery pack's terminals with heavy-duty
adhesive tape. Do not attempt to destroy or disassemble battery
C
D
7
USK KS 2 - 060104
Tabla de contenido
loading

Tabla de contenido