Installation Of The Fan Speed Control Cable - Gigabyte 3D Cooler Ultra GH-PCU31-SD Guia De Instalacion

Installation of the Fan Speed Control Cable

Figure 1
Figure 2
Figure 3
Figure 1
Connect the 3-pin cooler power connector to the white
connector of the fan speed control cable.
Figure 2
The figure on the left shows the completed connection.
Figure 3
Connect the other side of the cable to the CPU Fan connector
located on the motherboard. The original fan speed of 2,500
rpm will then drop down to 1,900 rpm.
- 9 -
GH-PCU31-SD