Installation Instructions For Amd Athlon Xp Clip - Gigabyte 3D Cooler Ultra GH-PCU31-SD Guia De Instalacion

Installation Instructions for AMD Athlon XP Clip

Figure 3
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU. The picture on the right shows the three insert
spaces on the cooler bracket where the CPU clips attach.
Figure 1
Attention!! The indication arrow on the cooler must align
with the central CPU clip.
Figure 2
Place the cooler atop the CPU and insert the indication arrow
side of the cooler in the space between the central jut of the
Figure 2
CPU socket and the edge of the CPU.
Figure 3
Align the three spaces on the cooler with the three clips on the
base of the CPU and then push firmly downwards to lock the
cooler securely in place. A flat-head screwdriver can also be
used to secure the clips in place.
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. Installation is now complete.
If fan speed control is required, please refer to
Figure 4
"Installation of the Fan Speed Control Cable".
- 7 -
GH-PCU31-SD