Tripp-Lite SmartPro 1U Rackmount El Manual Del Propietario página 5

200210187 Smart 700-1000 RM1U Owner's Manual 93-2102.qxd
Connection
Your UPS will function properly without these connections.
Serial Port Connection
1
Using the serial cable provided, connect a serial port
from a computer to a serial port on your UPS. Install
on the computer the Tripp Lite power protection software
appropriate to its operating system.
USB Port Connection
2
Using the USB cable provided, connect a USB port
from a computer to a USB port on your UPS. Install
on the computer the Tripp Lite power protection software
appropriate to its operating system.
EPO Port Connection
3
Using the RJ-11 cable provided, connect the
Emergency Power Off (EPO) port of your computer to
a user-supplied normally closed or normally open
switch according to the circuit diagram at the right.
The EPO port is not a phone line surge suppressor; do
not connect a phone line to this port.
optional
5
11/1/2002 9:50 AM
SMART1000RM1U
SNMP CONFIG.
ACC, SLOT
NORM DELAY
1
EPO
SEE MANUAL
1
SMART1000RM1U
SNMP CONFIG.
ACC, SLOT
NORM DELAY
1
EPO
SEE MANUAL
2
ACC, SLOT
NORM DELAY
EPO
SEE MANUAL
3
OPTION 1: USER SUPPLIED NORMALLY CLOSED SWITCH
2 2-3 JUPMER
3
RJ11
N.C. EPO SWITCH
4
PLUG
5
NO CONNECTION
OPTION 2: USER SUPPLIED NORMALLY OPEN SWITCH
N.O. EPO SWITCH
2
3
RJ11
4
PLUG
NO CONNECTION
5
EPO Circuit Diagrams
Page 5
1155
NYCE
2
1155
NYCE
2
SMART1000RM1U
SNMP CONFIG
1