Weinmann Homecare JOYCE Full Face vented Manual De Instrucciones página 26

Parameters
Switching pressure
anti-asphyxia valve
(vented variants)
Open:
Close:
Quoted two-figure noise
emission value to ISO 4871:
sound pressure level
sound power level (uncertainty
factor: 3 dB(A))
Working life
Standards applied
1
depending on size and design
2
If the materials used to produce masks are
exposed to aggressive cleaning agents, for
example, they age. In individual cases,
therefore, you may need to replace your mask
sooner (see "5. Functional check" on page 21).
Materials
Article
Mask cushion, port cap
Mask cushion GEL
Forehead cushion, retaining ring
Forehead cushion GEL
Mask frame, elbow
Headgear WEINMANNstrap
Headgear JOYCEstrap
Headgear HEADstrap
Rotating sleeve, forehead support
coarse adjustment component,
forehead support fine adjustment
component
Headgear clip
Valve cartridge (anti-asphyxia valve)
Quick release cord (ripcord)
24
EN
Value
≤1 hPa
≤2 hPa
16.5 dB(A)
24.5 dB(A)
2
up to 12 months
EN ISO 17510-2:2009
Subject to design
changes
Material
Silicone
Silicone,
silicone gel
TPE, Polypropylene
Silicone,
silicone gel,
polycarbonate
Polycarbonate
Lycra, Polyester,
Polyurethane,
Nylon, Cotton,
Polyamide
Cotton,
polyamide,
elasthane
Nylon/Spandex
Polyurethane Polyester/Lycra
Polypropylene
POM
TPE, Polypropylene
POM, Polyester,
Polyamide
Article
Plug for pressure measurement
connections
Plug for endoscopy adapter non-
vented
Mask cushion, forehead cushion
Mask body, elbow connector,
endoscopy adapter non-vented
Retaining ring, emergency exhalation
valve
All mask components are latex-free.
Pressure/flow characteristic curve
The pressure/flow characteristic curve shows
outlet flow as a function of therapy pressure.
100 100
90 90
80 80
70 70
60 60
50 50
40 40
30
20
10
0
0 5 10 15
Output pressure of therapy unit (hPa)
9 Warranty
Weinmann gives the customer a limited
manufacturer warranty on new genuine
Weinmann products and any replacement
part fitted by Weinmann in accordance with
the warranty conditions applicable to the
product in question and in accordance with
the warranty periods from date of purchase
as listed below. The warranty conditions can
be downloaded from www.weinmann.de on
the Internet. We can also send you the
warranty conditions on request. In the event
of a claim under warranty, please contact
your specialist dealer.
Material
Silicone
Silicone
Silicone and
silicone gel, silicone
coating
Polycarbonate,
Polyamide
Polypropylene,
TPE
JOYCE FF
vented
JOYCE FF
non vented
20 25 30 35 40